XperLUBE

XperLUBE

Automatically adjusting the lubrication rate in real time increases the reliability of your compressor.

LUBRICATION SYSTEM

More performance and reliability for your compressors

XperLUBE automatically supplies your system with exactly the right amount of lubricant and prevents damage through both under- and over-lubrication.
Easy diagnostics to find malfunctioning injectors
Individual components are quick and easy to replace and thus reduce compressor downtimes.
All parts are standardized and can be replaced individually. This simplifies inventory management and lowers costs.

XperLUBE is a Plug and play cylinder and packing lubrication system. The system has three components: a control unit, a hydraulic power unit, and injectors. Each injector is connected hydraulically to the common rail and electrically to the ExBox-L for power supply and data transmission.

Simple setup, maximum effect

XperLUBE reliably prevents damage caused by under- or over-lubrication. Real-time automated monitoring, control and adjustment of oil flow rates for for each lube point increases the efficiency and reliability of your compressors.

A high-pressure common rail supplies oil to the lubrication points. Metering and injection is achieved with injectors, one at each lube point. At the center of the system, a control unit monitors the performance of all injectors and adjusts lubrication rates according to preset parameters.

XperLUBE lowers the total cost of ownership

All parts are standardized and can be replaced individually. This simplifies inventory management and lowers costs.

Individual components are quick and easy to replace, making XperLUBE ideal for retrofitting existing systems.

Performance defining components

ExBox-L: In this central control unit, all the data on the lubrication process is monitored in real time. Deviations from preset values for a given operating condition are analyzed, resulting in an adjustment of the lubrication rate if required.

Hydraulic Unit: A centralized hydraulic pump keeps the oil in the common rail under constant high pressure. It transmits information on the oil supply conditions to the ExBox-L.

Injector: High-frequency opening and closing of a solenoid valve determines the amount of oil entering the cylinder.

Each injector is connected hydraulically to the common rail and electrically to the ExBox-L for power supply and data transmission. Adjustment of injector performance to operating conditions is software controlled.

Technical data

Ambient temperature	–25°C to 60°C up to 95°C for injectors
Max cylinder gas pressure	375 bar
Max speed	no restriction
Certificates	ATEX, IECEx
Conforms to API 618	yes